Product Description
Steady Custom Cycles Slip-On Slash Cut Pipes are crafted to the highest quality possible! True show quality!
The Slash Cut pipes does not have any type of baffling, like all our pipes. Baffles are available upon request for a small service fee.
SCC Slash Pipes are made with various spec. options:
- Diameters: 1-7/8″, 2″
- Lengths: 36”, 39”, 40”, 42”
- Slash cut angles: 45º, 60º
Custom lengths are available, please contact us for special ordering!
Machined, formed, and finished in the U.S.A!
True Dual headers are required in order for the pipes to work. When ordering, please specify what header pipes you’re running. We may contact you to confirm or verify additional information about your bike and set up to ensure fitment.
Note: Product photos are 60º angle slash cuts.
39″ Slash Cut (60 degree cut) Thank you for the photo Melvin Bencomo
37″ Slash Cut (45 degree cut)
Warranty: Our slip-on pipes are warranted against defects in material and/or workmanship for a period of 90 days the only bikes that are not covered by our warranty are the following models:
- 1997 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 1998 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 1999 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2000 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2001 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2002 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2003 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2004 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2005 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2006 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2007 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
- 2008 TOURING/BAGGER MODELS (Road King, Road Glide, Street Glide, Ultra Glide, Electra Glide)
The reason for not covering these models is due to the extreme vibration. The pipes are still available for these models however they are not covered by our warranty. The warranty does not cover finishes such as plating, or painted surfaces with discoloration or rust. This warranty shall be limited to the repair or replacement of the system, which may be proven defective under normal use. We will not warranty any system that has been abused, misused, improperly installed, modified, or damage during impact (scrape the curb, accident, etc.). If shock absorbing spacers were recommended for your Touring bike, please switch out the spacers to the recommended set or else cracking in the pipes may occur, if this is not followed the warranty will be voided. Shock absorbing spacers are recommended to prevent cracking. Do not over tighten the spacers because the spacers will not function properly due to the loss of elasticity from the extreme pressure. Intended for use only with stock engine not enhanced motors.
NOTE: Steady Custom Cycles Pipes does not have heat-shields, the pipes are 100% visible. The pipes are 1-7/8″ SCC pipes are not intended to match heat shield sizes. Discoloration on the pipe could occur if the engine is not tuned. Tuning your bike is highly recommended when changing the pipes out.
DISCLAMER: California Warning: The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than for racing vehicles on closed courses. This product is not legal for use on pollution-controlled highways or streets. Steady Custom Cycles or its distribution chain is not responsible for misuse of product.
– 
