Straight Pipes

$279.99$319.99

Steady Custom Cycles Slip On Straight pipes are available in various sizes! 1-7/8″ tube size that will slip over any 1-3/4″ header pipes.

Sold in pairs!

For Softails, please see related products for exhaust mounting brackets for specific headers.

When ordering, please specify the type of bike and year the item is being purchased for. We may contact you to confirm or verify additional information about your bike and set up to ensure fitment.

Made to order. Production lead time is 3-4 Weeks

Clear

Product Description

 

Steady Custom Cycles Slip-On Straight Pipes are crafted to the highest quality possible! True show quality! The Straight pipes does not have any type of baffling, they are indeed loud!

 

SCC Straight Pipes are made with  various spec. options:

  • Diameters: 1-7/8″,  (2″ for Rinehart Headers on Baggers)
  • Lengths: 36”, 39”, 40”, 42”
  • Additional hardware is needed (sold separately), please see below for more information.

 

Custom lengths are available, please contact us for special ordering!

Machined, formed, and finished in the U.S.A!

True Dual headers are required in order for the pipes to work.

SPECIAL FITMENT ADJUSTMENT FEE NOTE (only applies to those who has the fitment listed below):
CHARGES WILL BE ADDED ONCE ORDER IS PLACE, WE WILL SEND YOU AN INVOICE FOR THESE SPECS.

Softail: For SOFTAIL with Bassani Header Pipes AND Bassani Brackets Fitment (additional $25 charge to change the mounting tab for Bassani brackets) *Does not apply to those who want to upgrade to Steady Custom Cycles Beefy Brackets.*
Softail: For Softail Springer with OEM Dual Header Pipes and OEM mounting brackets fitment (additional $25 charge to change the mounting tab brackets)
Bagger/Touring: For those with Rinehart Header Pipes (1-7/8″ OD Headers) (additional $25 charge to resize the slip fit portion to 2″OD to fit onto header).

 

 

INSTALLATION NOTES:

BAGGERS/TOURING

If being installed onto a touring/bagger, the SCC Bagger Installation Hardware Kit (PN: SCC-1025-EXHHW-BAGGER) is required to level the pipes with the header and also to fill the void when swapping from a large 3″/4″ diameter muffler down to the SCC Slip-On Pipes (1-7/8″).

 


SOFTAILS:

If being installed on a Softail, if the head pipes you’re using has muffler brackets, you may be able to use them. However during the time of ordering, specific which head pipes you have so that we could make the correct length and position the brackets correctly. We recommend using the Steady Custom Cycles Beefy 1/2″ thick brackets (PN: SCC-1017) as they are stronger and they are already chromed.

 

 

Tuning and Chrome Finish

Tuning your bike is highly recommended when changing the pipes out. Tuning your engine will make it run optimal, which in turn will give you the best performance and reliability. It’s common that the engine may require tuning when the exhaust system is changed. Please contact us or speak to your local motorcycle tuning center for more information about tuning your bike.

Steady Custom Cycles Pipes does not have heat-shields, the pipes are 100% visible. Discoloration on the pipe could occur if the engine is not tuned. It’s known that air-cooled motorcycle runs hot and newer bikes with electronic fuel injection (EFI) system, also tends to run hot because it needs to meet emission requirement. For this very reason, we recommend engine tuning when installing SCC exhaust pipes.

Maintenance

After installing the pipes, wipe the pipes down with a clean cloth and acetone/rubbing alcohol to remove all oil and grimes from installation and handling process. Once your pipes are used, you could continue to use chrome polish and compound to keep the pipes shining!

Warranty

All of our slip-on pipes are warranted against defects in material and/or workmanship for a period of 1 year. This does not cover finishes such as plating, or painted surfaces with discoloration or rust. This warranty shall be limited to the repair or replacement of the system, which may be proven defective under normal use. We will not warranty any system that has been abused, misused, improperly installed, modified, or impact damages during normal use (scrape the curb, accident, rubbing contact, etc).

DISCLAIMER

California Warning: The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than for racing vehicles on closed courses. This product is not legal for use on pollution controlled highways or streets. Steady Custom Cycles or its distribution chain is not responsible for misuse of the product.

Custom pipes are designed to be used for off-road use or for demo/show vehicles. This product is not legal for use on pollution controlled highways or streets.

Additional Information

Weight 8 lbs
Dimensions 45 x 6 x 6 in
Length

36″, 39″, 40″, 42″

Bagger or Softail

Bagger, M8 Bagger, M8 Softail, Softail

Diameter

1-7/8″, 2″

Header Pipe Type

Bagger Stock OEM, Bassani, Freedom Performance, Others, Rinehart, Samson, Vance and Hines