SCC 4" EXTENDED TRADITION BAG GUARDS

The Steady Custom Cycles Tradition 4″ Extended Bag Guards are produced like no other bag guards on the market! Extended 4″ to cover 4″ stretched bags! Steady Custom Cycles built the Tradition 4″ Extended Bag Guards to solve the short bag guard problem that everyone faces when they get their bags extended! Built from large 1.25″ tubing for that fat and beefy look! 

For the ultimate styling package, be sure to purchase the matching Tradition Handlebars and Engine Guards as well!

• For bikes that do not have existing bag guards, it’s required to cut the bag support tube so that it would slide into the slip-fit tube on these bag guards.
  
• Only compatible with mufflers up to 2.25″ diameter, anything larger than 2.25″ may touch the bag guards.
• Softails can purchase rear guards regardless of using saddlebags or not.
• If using extended side covers; the bag guards will not fit.
  
• AVAILABLE FOR BAGGER AND SOFTAIL MODELS (NOT AVAILABLE FOR 2018 & UP SOFTAILS, NOT AVAILABLE FOR SOFTAILS BEFORE THE 2000’s.)

Note: Like all our products, these set does not come with hardware. If you are looking to get the bag guards and rails, please let look up "SCC 4" EXTENDED TRADITION BAG GUARDS & RAILS" on our website's search bar. You can also find this on our drop down menu when you select the option for rear guards. 

Extended Bag Guards and Rails Warranty: All of our Guards and Bag Rails are warranted against defects in material and/or workmanship for a period of 90 days. This does NOT cover finishes such as plating, or painted surfaces with discoloration or rust. This warranty shall be limited to the repair or replacement of the part, which may be proven defective under normal use. We will not warranty any parts that has been abused, misused, improperly installed, modified, or damaged during impact (scape the ground, tool marks, accident, etc.).
Disclaimer: Rear Guards and Bag Rails are ornamental/dress up products with no special functions. All Guards and Bag Rails are built to fit factory chassis/frame, if there are any modifications or damages done to the chassis, then fitment may not work due to the changes. For lowered motorcycle, such as fender clearance when suspension is compressed and swing arm clearance. The guards are intended for compatibility only with muffler pipes that are 2.5" in diameter or under. Rails require clearance in the back between the fender and the bags. If customer is using extended gap covers, the rails will not have clearance and therefore will not fit. SCC Rails were made for bags with a thin diameter and extended down. Not compatible with the down and out bags or fat after market bags. NOT available for 2018 and over softail. Product does not come with hardware. Steady Custom Cycles is not liable for any damages. Warranty not valid if parts are not installed by approved SCC Dealer.