SCC OLD SCHOOL HANDLEBAR

Steady Custom Cycles OLD SCHOOL handlebar is no regular classic apes, the flow and bends are very clean and smooth, giving your bike a key look over any bikes other bikes with apes installed. Made from 1-1/2″ tubing that is tapered down to 1″ on the handle control areas, no welding or unusual joints anywhere on the handlebar, giving it that SCC signature clean and smooth appearance.

Steady Custom Cycle’s complete handlebar line is machined, formed, and finished in the U.S.A, from .120” wall cold roll steel that has been completely TIG welded in every jointed area.  All crucial slots are done for internal wiring, positioning pin for handlebar clamps, and throttle by wire (TBW)! Installation is made simple with our pre-machined features! Like with any SCC handlebars, we could fully customize and build a handlebar to your specifications. Please contact us for more information, lead time, and a price quote. For orders on 1.5″ clamp diameters the bars will not have the knurling (the extra grip added to our SCC Handlebars)  for the risers in order to allow the customer the ability to place the risers at the areas needed to show a clean look. Disclaimer: SCC is not responsible for improper installation, it is recommended to get all products professionally, if not professionally installed.  Our warranty can be found at the bottom of this page.

Bonita Handlebar for Harley Davidson Specs:

• Available rise: 14″ – 18″ (For custom height please call)
• Pullback: 9-1/2″
• Width: 40″
• Tube diameter: 1-1/2″ tapered to 1″ on hand control areas
• Clamp diameter: 1″ and 1-1/4″  (add $45 for 1-1/4″ and for Road Glide Fitment)
• Clamp area width end-to-end: 5-1/4″

Features:

• Simple but unique and custom design.
• Sturdier and stronger than OEM handlebars
• Internal wiring ready
• Pre-Machined slots for Throttle-By-Wire (TBW) and clamp positioning pin (Road Glide Fitment)
• Will work with hydraulic or cable clutch

Additional Parts Required (Not included, sold separately):

*Actual length varies with select handlebar height and riser height*

• Extended Clutch Cable/Line
• Extended Throttle Cable (for non-TBW)
• Extended Control Wires

If your bike has two-piece top/upper handlebar clamps, single solid top/upper clamps are *required* to run all handlebars with a rise of 12″ and higher. We also highly recommend upgrading the main riser bolts to grade-8! Solid or stiffer (polyurethane) handlebar bushings are also highly-recommended.  These recommendations are for your safety, do it once, do it right!