SCC 4" BULLHORN EXTENDED BAG GUARDS

For the ultimate styling package, be sure to purchase the matching Bull Horn Handlebars and Engine Guards as well!

SCC Bag Rails! If you’re planning to run bag rails, then please check the fitment list to make sure that the item will fit your bike. A customer representative will contact you after purchasing to confirm fitment.

 FITMENT:

• For 2014+ bikes, it’s required to cut the bag support tube so that it would slide into the slip-fit tube on these bag guards.
• Bag Rails are not compatible with oval bags. If your extended bags have a bit of an oval shape where the center of the bag sticks out a bit, chances are it will scrape against the rails.
• Only compatible with mufflers up to 2.25″ diameter, anything larger than 2.25″ may touch the bag guards.
• If using fender covers; the rails may have clearance issues. Will only fit stock fender covers on Street Glide, Road Glide, Electra Glide.
• Softails can purchase guards regardless if they are using saddlebags or not.
• Softails can purchase rails but may need to change the saddlebag support brackets in order to have the proper mounting.
• Will work with most standard air-ride equipped bikes (1997-2013)
• AVAILABLE FOR BAGGER AND SOFTAIL MODELS (NOT AVAILABLE FOR 2018 & UP SOFTAILS, NOT AVAILABLE FOR SOFTAILS BEFORE THE 2000’s.)

Machined, formed, and finished in the U.S.A, from .120” wall cold roll steel that has been completely TIG welded in every jointed area. Built for specific Harley Davidson chassis, making installation a breeze! SCC Guards are made to fit Original Harley-Davidson Extended bags. Aftermarket Bags are not guaranteed proper fitment. Photo confirmation of Extended bags is requested when placing the order in order to check for any clearance issues. NOTE: Like all our products this item does not come with hardware. 

Extended Bag Guards and Rails Warranty: All of our Guards and Bag Rails are warranted against defects in material and/or workmanship for a period of 90 days. This does NOT cover finishes such as plating, or painted surfaces with discoloration or rust. This warranty shall be limited to the repair or replacement of the part, which may be proven defective under normal use. We will not warranty any parts that has been abused, misused, improperly installed, modified, or damaged during impact (scape the ground, tool marks, accident, etc.).

Disclaimer: Rear Guards and Bag Rails are ornamental/dress up products with no special functions. All Guards and Bag Rails are built to fit factory chassis/frame, if there are any modifications or damages done to the chassis, then fitment may not work due to the changes. For lowered motorcycle, such as fender clearance when suspension is compressed and swing arm clearance. The guards are intended for compatibility only with muffler pipes that are 2.5" in diameter or under. Rails require clearance in the back between the fender and the bags. If customer is using extended gap covers, the rails will not have clearance and therefore will not fit. SCC Rails were made for bags with a thin diameter and extended down. Not compatible with the down and out bags or fat after market bags. NOT available for 2018 and over softail. Product does not come with hardware. Steady Custom Cycles is not liable for any damages. Warranty not valid if parts are not installed by approved SCC Dealer.