SCC EMPIRE HANDLEBARS

Steady Custom Cycles Empire Handlebars share some design features from our Bullhorn handlebar but simplified in a tasteful way. The Empire handlebars features straight up-rise tubes that goes outward towards the top. Joining the hand grip tubes to the up-rise tube are meat-hooks, giving that custom and sharp design. The SCC Empire handlebar will make your bike look great from all angles!

The Empire handlebars will not fit onto a Street Glide, for handlebars that are similar in style, please take a look at the Steady Custom Cycles Equalizer handlebars that were made specifically for Street Glides.

Steady Custom Cycle’s complete handlebar line are machined, formed, and finished in the U.S.A, from .120” wall cold roll steel that has been completely TIG welded in every jointed area.  All crucial slots are done for internal wiring, positioning pin for handlebar clamps, and throttle by wire (TBW)! Installation is made simple with our pre-machined features! Like with any SCC handlebars, we could full customize and build a handlebar to your specifications. Please contact us for more information, lead time, and a price quote.

Empire for Harley Davidson Spec:

• Available rise: 12″ – 18″
• Pullback:11″
• Width: 40″
• Tube diameter: 1-1/2″ Tubing tapered to 1″ round tubing on hand control areas
• Clamp diameter: 1″ and 1-1/4″ (add $45 for 1-1/4″ and for Road Glide Fitment)

Features:

• Unique and custom design
• Sturdier and stronger than OEM handlebars
• Internal wiring ready (NOT pre-wired)
• Pre-Machined slots for Throttle-By-Wire (TBW) and clamp positioning pin (Road Glide Fitment)
• Will work with hydraulic or cable clutch
• Consistence 1-1/2″ diameter tubing

If your bike has individual top/upper handlebar clamps, single solid top/upper clamps are *required* to run all handlebars with a rise of 12″ and higher. Solid or stiffer (polyurethane) handlebar bushings are highly-recommended. For those with Road Glides from 2014 and up, please know that we use the stock handlebar dimensions so if you change your control housing to after market housing the placement of the slots and holes will be off. There are holes on the bars in the area for the controls for the original housing to lock in. After market control housing have a shorter width and expose the holes and do not line up. Please keep in mind that our bars are 1.5" and stock are 1" or 1.25", meaning that the stock housing may be a bit small for the bar diameter, if this happens we recommend that you trim the housing a bit to fit the bars and have the housing fit tight. We suggest getting the bars professionally installed.

Handlebars Warranty: All of our handlebars are warranted against defects in material and/or workmanship for a period of 90 days. This does NOT cover finishes such as plating, or painted surfaces with discoloration or rust. This warranty shall be limited to the repair or replacement of the part, which may be proven defective under normal use. We will not warranty any parts that has been abused, misused, improperly installed, modified, or damaged during impact (scrape the ground, tool marks, accident, etc).

NOTE: Steady Custom Cycles recommends upgrading riser bolts to GRADE 8 for all handlebar installs. For 14” and taller bars, we recommend changing any independent (separate risers, commonly on 2009 and below) to solid top clamps on the riser. For any bars over 18”, we recommend changing the risers to beefy solid risers. Handlebars do not come with risers or cable clamps or cables. Custom handlebars are not exchangeable and non-refundable. Custom orders are tailor made for a specific customer’s needs/requests. This applies to custom heights, diameter, and bends. Customer will be advised by manufacturer but will ultimately be made using the customers specifications. Warranty not valid if parts are not installed by approved SCC Dealer.

WARRANTY DO NOT APPLY FOR ORDER SHIPPING OUTSIDE OF THE USA.