SCC SLASH CUT PIPES (CHROME)

Steady Custom Cycles Slip-On Slash Cut Pipes are crafted to the highest quality possible! True show quality! Slash Cut pipes are were created to flow with the old school lowrider style.  Like all our pipes our Slash Cut pipes are made in house, with the exception of the chrome. We pride ourselves is offering the best quality possible. The option on the diameter is for the 2" is that the pipes will be 2" in diameter except for the first 1.5" of the pipes (the area where it connects to the head pipes can be changed based on the head brand that you are using). We also ask what header brand because we assume that you will be also using the mounting brackets that come with the head pipes (this applies only for the softails). If you are using mounting brackets that are not the original that come with the head pipes, please let us know through email or over the phone after placing the order. 

We will contact you to confirm or verify additional information about your bike and set up to ensure fitment.

Specs:

• Lengths Available: 36" , 39" , 40" , 42" 
• Diameters: 1-7/8" , 2"
• Degree Cut:  60
• CHROME PLATED
• Compatible only with True Duals
• Compatible with the following True Duals: SAMSON, RINEHART, S & S, BASSANI, VANCE & HINES, FREEDOM PERFORMANCE, BAGGER STOCK, M8 MODELS (M8 BASSANI for softail & bagger/ M8 SAMSON for softail & bagger/M8 FREEDOM for baggers/M8 S & S for baggers/ M8 STOCK for baggers).

For custom lengths please contact us to place the order. 

Our slip-ons are intended for use on true dual exhaust. The drop down menu where is reads: HEADER BRAND. That is asking what header brand will you be using so that we can make the slip-ons custom to fit the current or new head pipes that you will be using. The diameter of our pipes is 1-7/8" to slip over the head pipes of 1-3/4".  M8 BAGGER STOCK has the left side head pipe in a regular 1-3/4" and the right side has a wider opening. 

If you are using Rinehart head pipes the connection will be 2" in diameter, please note that our slip-ons do not come with hard ware or muffler clamps. That can be purchased separately. For touring bikes we recommend purchasing our mounting kit. The black mounting kit is the preferred set since those have anti-vibration rubber spacers to absorb the vibration that the bike produces. Customers with Softails using BASSANI will be contacted to confirm fitment. Please note that BASSANI POWER CURVE is compatible with our pipes but it will be an extremely time consuming install when attempting to level the pipes. The head pipe on the right side has a bend that is not standard for true dual exhaust pipes. This bend throws off the placement of the pipes. Please know that our BEEFY Brackets are not compatible with BASSANI POWER CURVE. For Softail customers we recommend switching to our SCC BEEFY MOUNTING Brackets and softail mounting kit. The brackets we make add more chrome and stronger support. 

Machined, formed, and finished in the U.S.A!

Softail SCC BEEFY Brackets and Softail Mounting Kit are sold separately (sku: SCC-1017)

SCC Bagger Mounting Kit is Sold Separately (sku: SCC-1025-BAGGER)

Pipes Warranty:  Our slip-on pipes and tips are warranted against defects in material and/or workmanship for a period of 90 days. The following models are not covered by our warranty 1997-2008 Touring/Bagger. Our warranty does not cover finishes such as plating, or painted surfaces with discoloration or rust. This warranty shall be limited to the repair or replacement of the system, which may be proven defective under normal use. We will not warranty any system that has been abused, misused, improperly installed, modified, or damage during impact (scrape the curb, accident, etc.). Intended for use with stock engine only. If shock absorbing spacers were recommended for your Touring bike, please switch out the spacers to the recommended set or else cracking in the pipes may occur, if this is not followed the warranty will be voided. Shock absorbing spacers are recommended to prevent cracking. Do not over tighten the spacers because the spacers will not function properly due to the loss of elasticity from the extreme pressure. Please remember that the anti vibration spacers are made of a rubbery material and with use, over time be sure to replace the spacers for a new set to extend the life time of your pipes. Steady Custom Cycles muffler pipes are ornamental and not intended to improve performance. Warning: Warranty not valid if parts are not installed by approved SCC Vendor.

NOTE: Steady Custom Cycles Pipes does not have heat-shields, the pipes are 100% visible. Discoloration on the pipe could occur if the engine is not tuned. Tuning your bike is highly recommended when changing the pipes out.

DISCLAMER: California Warning: The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than for racing vehicles on closed courses. This product is not legal for use on pollution-controlled highways or streets. Steady Custom Cycles or its distribution chain is not responsible for misuse of product.

IMPORTANT: FINAL SALE ON ALL ORDERS. WARRANTY IS VOIDED IF THE PARTS SHIP OUTSIDE OF THE USA. ALL PACKAGES DROPPED OFF AT A FREIGHT FORWARDER WILL NOT BE WARRANTED.